Example Of Programming A Code - Motorola RMU2040 User Manual

Short press the PTT button to enter Frequency
•
Programming Selection Mode. Radio will
announce current value '2'
Press SB1 button eleven times to scroll up the
•
frequency list and you will hear frequency "13"
•
Long press the PTT button. LED Indicator will
show a green heartbeat to indicate 'Idle' state.
•
Long press the PTT button to exit Programming
Mode or turn radio OFF.
42
English

Example of Programming a Code

Assuming current code value is set to factory
default '001', and you want to change it to
CTCSS/DPL Code = 103 follow the sequence
below:
Enter into Advanced Configuration Mode
•
Short press the PTT button twice and you will
•
hear "Code #" (Entering CTCSS/DPL
Programming Selection Mode).
Press and hold SB1 or SB2, selections shall
•
fast forward/rewind starting at the nearest 10's,
when released the radio starts playing the first,
second and third digit in full, keep pressing SB1/
SB2 several times until you hear "103"
Long press the PTT button. LED Indicator will
•
show a green heartbeat to indicate 'Idle' state.
• Long press the PTT button to exit Programming
Mode or turn radio OFF.