Programming Values Example; Frequency - Motorola RMV2080 User Manual

4. When I was programming I made a
mistake and programmed the wrong
value. How can I erase it or re-program
it?
If you make a mistake while programming a
value you have two choices:
• The radio roll-over each time it reaches a
maximum value. Keep increasing (short press
SB1) or decreasing (short pressing SB2) until
you get the desired value or,
•
Turn OFF the radio and start-over.
5. I just programmed the value I wanted.
How do I exit Programming Mode?
• If you are in Programming Mode you can exit by
long pressing the PTT button twice.
• If you are already in the 'Idle' Programming
Mode, long press the PTT button once.
6. I am done programming the features in
this channel and want to program another
channel.
Press short PTT several times until you hear
"Channel Number", then switch channel using
SB1 and SB2. If you wish to save the changes,
make sure you are in the 'Idle' Programming
Mode before switching
otherwise you will lose the changes made.

PROGRAMMING VALUES EXAMPLE

Example of Programming a Frequency
Assuming current frequency value is set to
Channel 1, with the UHF default frequency
'02' (equivalent to 464.5500 MHz), and you
want to change it to Frequency Number =
'13' (which is mapped to 461.1375 MHz), follow
this sequence:
• Enter Programming Mode
the channel as
43
English