Installing A Fan Module - Cisco ME 3800X Installation Manual

Chapter 3 Installing and Removing AC and DC Input Power Supply and Fan Modules

Installing a Fan Module

Insert the new fan module in the power supply module slot, and gently push it into the slot
Step 1
When correctly inserted, the fan module is flush with the switch rear panel.
Figure 3-14
Align the two captive screws with the screw holes in the panel. Use a ratcheting torque screwdriver to
Step 2
torque each screw to 10 in-lb.
From the front of the switch, confirm that the PS/FAN LED is green. If you can access the switch rear
Step 3
panel, verify that the FAN LED is green. See the
description of the fan module LED. See the
descriptions.
OL-22168-01
Inserting a Fan Module in a Switch
Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
Power Supply and Fan Module Installation
"Fan Module LED" section on page 1-13
"Switch LED Panels" section on page 1-7
(Figure 3-14).
for a
for system LED
3-13