Chapter 3
Installing and Removing AC and DC Input Power Supply and Fan Modules
Figure 3-9
Attach the dual-hole lug and the wire assembly to the chassis ground connection with the supplied
Step 5
screws
Figure 3-10
1
Dual-hole ground lug
Use a ratcheting torque Phillips-head screwdriver to torque the ground-lug screws to 32 in-lb.
Step 6
Connect the other end of the grounding wire to an appropriate grounding point at your site or to the rack.
Step 7
OL-22168-01
Crimping the Ground Lug
(Figure
3-10).
Attaching the Ground Lug and Wire Assembly
1
Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
Power Supply and Fan Module Installation
3-9