Cisco ME 3800X Installation Manual page 33

Chapter 2 Switch Installation
After the switch is mounted in the rack, you need to do these tasks to complete the installation:
•
•
•
For configuration instructions about using the CLI setup program, go to
Switch with the CLI-Based Setup Program."
Wall-Mounting
•
•
Wall-mounting is not supported for NEBS applications.
Note
Attaching Brackets for Wall-Mounting
Figure 2-8
1
22 23
24
24X
1
Follow the same steps to attach the second bracket to the opposite side.
OL-22168-01
Power on the switch. See the
Connect to the console port, and run the initial configuration. See the Cisco ME 3800X and
ME 3600X Switch Getting Started Guide for instructions.
Connect to the front-panel ports. See the
page 2-19 and the "Connecting to Fiber-Optic SFP+ and SFP Modules" section on page
Attaching Brackets for Wall-Mounting, page 2-13
Mounting the Switch on a Wall, page 2-14
Attaching 19-inch Bracket to Wall-Mount Cisco ME 3800X
1
2
Phillips truss-head screws
"Verifying Switch Operation" section on page
"Connecting to the 10/100/1000 Ports" section on
1
Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
Installing the Switch
2-4.
2-20.
Appendix C, "Configuring the
2-13