Celestron NexStar 60 Instruction Manual page 17

Telescope Model – Select your telescope model from the
drop-down list.
Location – Click the Change Location button to choose the
city closest to your location.
Time – The software will use the current time setting from
your computer, however you must indicate your time zone
and whether Daylight Savings is in effect.
6. Click the Save button to save these parameters.
Press the Align button to begin the alignment procedure. Follow the on-screen instructions for aligning the NexStar on
two stars in the sky. For information on using many of the GuideStar features, refer to the AutoAlign instructions in
the NexStar GT section of your manual. The GuideStar software also has help buttons to explain many of the
commonly used fields.
Fig 4-3 – Testing Communication
17