Operation Indicator - Hitachi RAS-X10CY Instruction Manual

INDOOR UNIT INDICATORS

OPERATION INDICATOR

TEMPORARY SWITCH
Use this switch to start and stop when the remote controller does not work. [Use non-conductor stick
(example toothpick)]
By pressing the temporary switch, the operation is done in previously set operation mode.
G
When the operation is done using the temporary switch after the power source is turned off and turn on
G
again, the operation is done in automatic mode.
RAS/RAC-X10CY/X13CY (EN1)
Black
FILTER LAMP
When the device is operated for a total of about 100
hours, the FILTER lamp lights to indicate that it is time
to clean the filter. The lamp goes out when the POWER
SWITCH set to OFF and ON again.
OPERATION LAMP
TEMPORARY
This lamp lights during operation.
SWITCH
TIMER LAMP
This lamp lights when the timer is working.
Temporary Switch emporary Switch
Press Press
Non-conductor Stick Non-conductor Stick
– 5 –
5
TEMPORARY
SWITCH
2/3/09, 15:03