Circulation Operation - Hitachi RAS-X10CY Instruction Manual

CIRCULATION OPERATION

I Circulation Function
G
During circulation operation, compressor will not be running and there is no cooling operation with only
indoor fan running.
G
When the setting temperature is higher than room temperature, indoor fan will stop running.
RAS/RAC-X10CY/X13CY (EN1)
Black
Press the button so that the display indicates
1
(CIRCULATE).
Circulating operation starts with a beep.
Press the FAN SPEED button and select the desired FAN
2
SPEED (the display indicates your choice).
3
Press the temperature control button to set to the desired
temperature.
Press the (STOP) button to stop operation.
STOP
I As the settings are stored in memory in the remote controller,
you only have to press the
– 10 –
10
(CIRCULATION) button next time.
2/3/09, 15:03