How To Exchange The Batteries In The Remote Controller - Hitachi RAS-X10CY Instruction Manual

HOW TO EXCHANGE THE BATTERIES IN THE REMOTE CONTROLLER

When using the remote control, if there is no response from the air conditioner unit and or the remote control
has fading and dim displays, the batteries in the remote control device need to be removed and replaced
with new ones
RAS/RAC-X10CY/X13CY (EN1)
Black
1
Remove the cover as shown in the figure and
take out the old batteries.
2
Install the new batteries.
The direction of the batteries should match the
marks in the case.
! CAUTION
1. Do not use new and old batteries, or different kinds
of batteries together.
2. Take out the batteries when you do not use the remote
controller for 2 or 3 months.
3. Use high quality and high performance AAA batteries to
avoid short operating life and electrolyte leakages
– 15 –
15
=
2/3/09, 15:03