TouchView user interface
Mode name
a: Current page
b: Category popup button
c: Popup button
d: Edit cell
e: Knob
f: Slider
g: Page tab
h: Page group tab
The KRONOS uses Korg's TouchView graphical user
interface. By touching objects displayed in the LCD
screen, you can select pages, set parameter values,
enter text, connect virtual patch cables, and more.
Important - calibrate before using!
Make sure to calibrate the touch‐screen before using,
or when you change the angle of view (for instance,
when you move between sitting and standing):
1. Press the GLOBAL button to go to the GLOBAL
P0:BASIC SETUP page.
2. Press the page menu button to open the menu, and
select the Touch Panel Calibration command.
3. Follow the on‐screen instructions.
For best results, calibrate using a stylus or fingernail,
and press the exact centers of the calibration boxes.
a: Current page
From the left, the top of the display shows the current
mode, the number and name of the page group, and
finally the name of the individual page.
b: Category popup button
When you press this button, a tabbed popup menu will
appear, allowing you to select Programs,
Combinations, or GEs organized by category.
c: Popup button & menu
When this button is pressed, a popup menu will
appear, showing a list of options. In some cases, these
will be parameter values. In others, they may be lists of
items, such as Multisamples or FX Presets. To enter a
parameter value, touch the desired value.
Page group number and name
Pin
Many popup menus have a "Pin" in the
upper left. This controls what happens
after you select a value. Touch the pin
graphic to switch between open
(unlocked) and closed (locked).
When locked (pin closed), the popup menu will remain
displayed even after you select a parameter value. To
close the popup, either unlock the pin, or press EXIT.
When unlocked (pin open), the popup menu will close
immediately when you press a parameter value, or
when you touch the screen outside the menu.
d: Edit cell
When you touch a parameter in the LCD screen, the
parameter or its value will usually be highlighted
(displayed in inverse video). This is called the edit cell,
and the highlighted item is now selected for editing.
The parameter value of the edit cell can be modified
using the VALUE controllers.
e & f: On-screen sliders and knobs
To modify the value of an on‐screen slider or knob, first
touch the object, and then use the VALUE controllers
to modify the value.
g & h: Page group tabs and Page tabs
Press the lower row of tabs to select the page group,
and then press the upper row of tabs to select the page.
The top of the screen shows the name of the current
page and group; see "a: Current page" on page 13.
TouchView user interface
i: Check box
Page name
j: Page menu button
Pin
13
En-