Korg KRONOS Quick Start Manual page 10

Front Panel
18. SAMPLING buttons
REC button
In Sampling, Program, Combination, and Sequencer
modes, pressing this button puts the system in
sampling‐ready mode. The button's LED will light up.
To continue, press the SAMPLING START/STOP
button, as described below.
Note: Program, Combination, and Sequencer modes all
have an Audio Input/Sampling page, with various
sampling‐related settings. These pages also have an
Auto Sampling Setup menu command, with options to
make various common settings in a single step.
START/STOP button
In Sampling, Program, Combination, and Sequencer
modes, pressing this when the SAMPLING REC
button is lit will do one of three things, depending on
the setting of the Trigger parameter (on the Sampling
mode Recording ‐ Audio Input page):
• If Trigger is set to Sampling START SW, sampling
will begin immediately.
• If Trigger is set to Note On, sampling will begin as
soon as you play a note on the keyboard.
• If Trigger is set to Threshold, sampling will begin
as soon as the selected audio source reaches a
preset volume level.
On the Sample Edit page in Sampling mode, pressing
this button will play the selected range of the current
sample.
Also, whenever you're viewing a list of files on disk,
you can press this button to play 44.1kHz or 48kHz
WAVE files directly from disk.
19. TouchView display
The KRONOS features Korg's exclusive TouchView
graphic interface, based on a touch‐panel LCD screen.
By touching items on the LCD screen, you can navigate
between pages, set parameter values via on‐screen
menus and buttons, execute commands, and so on. For
more information, see "TouchView user interface" on
page 13.
10
En-