Setting Interrupt Display; Display Area <Display Area; Automatic Brightness <Auto Brightness; Change Color <Change Color - Kenwood TM-D710E Instruction Manual

SETTING INTERRUPT DISPLAY

Enter Menu mode and access Menu 625.
■ Display Area <DISPLAY AREA>
Selects the Display area.
[ENTIRE ALWAYS]: The received new data, duplicate
data, and My station data information appears on the
full display, other data information appears only at the
top of the display.
[ENTIRE]: The received new data information appears
on the full display, other data information appears only
at the top of the display.
[HALF]: The received new data information appears on
the left half of the display only, other data information
appears only at the top of the display.
[OFF]: The received new data information appears
only at the top of the display.
Note: When an emergency message or a message designated for
your station is received, the received data information appears on
the full display, even if the display method is set to [HALF] or [OFF].
When a status message is received, it is displayed on half of the
display.
■ Automatic Brightness <AUTO BRIGHTNESS>
When ON is selected and My station address message
is received, the backlight turns on (2 step).
■ Change Color <CHANGE COLOR>
When ON is selected and My station address message
is received, the backlight color changes.
■ Interrupt Time <INTERRUPT TIME>
Set the duration to display an indication for when new
data is received. If you select "Infinite", the indication
cannot be canceled.
The Interrupt time can be set to 3, 5, 10 seconds or
"INFINITE".
SELECTING A DISPLAY UNIT (1)
Enter Menu mode and access Menu 626.
■ Speed, Distance <SPEED, DISTANCE>
Select to [mi/h, mile], [km/h, km], or [knots, nm] .
■ Altitude, Rainfall <ALTITUDE, RAIN>
Select to [feet, inch] or [m, mm].
■ Temperature <TEMPERATURE>
Select to [°F] or [°C].
SELECTING A DISPLAY UNIT (2)
Enter Menu mode and access Menu 627.
■ Latitude longitude <POSITION>
Select to [dd°mm. mm'], or [dd°mm' ss. s"] .
■ Grid Format <GRID FORMAT>
Select to [MAIDENHEAD GRID], [SAR GRID (CONV)],
or [SAR GRID (CELL)] .
SELECTING A NAVITRA GROUP
Enter Menu mode and access Menu 628.
■ Group Mode <GROUP MODE>
Select to Group mode ON or OFF.
■ Enter Group Code <GROUP CODE>
You can enter 0 to 9, A to Z.
STORING NAVITRA MESSAGE
Enter Menu mode and access Menu 629.
You can create up to 5 phrases each of which can consist
of up to 20 characters.
APRS-20