3-Point Rear Centre Seat Belt - Hyundai i30 Owner's Manual

Operation maintenance specifications
Hide thumbs Also See for i30:
Table of Contents

Advertisement

1
B210A01NF-E
To release the seat belt:
The seat belt is released by pressing the
release button (1) in the locking buckle.
When it is released, the belt should auto-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.
If the seat belt does not draw back into
the retractor after checking for any twists
have the belt inspected by a HYUNDAI
dealer.
C020104AUN-EA

3-point rear centre seat belt

(if equipped)
To fasten the rear centre seat belt:
1. Pull the webbing slowly out from the
retractor on the top of the seatback to
connect the rear centre belt.
CAUTION
- Cargo
Be sure that cargo is securely
loaded in the rear cargo area.
Failing to do so may cause damage
to the rear centre seat belt in sud-
den stops or collisions.
Safety system of your vehicle
OFD037053
2. Insert the metal tab (1) into the open
end of the anchor connector (2) until
an audible "click" is heard, indicating
the latch is locked. Make sure the belt
is not twisted.
OFD037054
3 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents