Fan Speed Control; System Operation - Hyundai i30 Owner's Manual

D230104AUN

Fan speed control

The ignition switch must be in the ON
position for fan operation.
The fan speed control knob allows you to
control the fan speed of the air flowing
from the ventilation system. To change
the fan speed, turn the knob to the right
for higher speed or left for lower speed.
Setting the fan speed control knob to the
"0" position turns off the fan.
OFD047081
D230105AUN
Air conditioning (if equipped)
Push the A/C button to turn the air condi-
tioning system on (indicator light will illu-
minate). Push the button again to turn the
air conditioning system off.
Features of your vehicle

System operation

D230501AUN
Ventilation
1. Set the mode to the
2. Set the air intake control to the outside
(fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
OFD047082
D230502AUN
Heating
1. Set the mode to the
2. Set the air intake control to the outside
(fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If dehumidified heating is desired, turn
the air conditioning
equipped) on.
• If the windshield fogs up, set the mode
,
to the
position.
position.
system (if
position.
4 69