Hyundai i30 Owner's Manual page 177

1. FM/AM Selection Button
Turns to FM/AM mode and toggles FM1
➟ ➟
and FM2 AM FM1··· when the button is
pressed each time.
2. Power ON/OFF & Volume
Control Button
Turns on/off the set when the IGNITION
SWITCH is on ACC or ON.
If the button is turned to the right, it
increases the volume and left, decreases
the volume.
3. AUTO STORE Button
When the button is pressed, it automati-
cally selects and saves channels with
high reception rate to PRESET but-
tons(1~6) and plays the channel saved in
PRESET1.
If no channel is saved after AST, it will
play the previous channel.
4. Automatic Channel Selection
Button
• When the [SEEK ] button is pressed,
it reduces the band frequency by 5kHz
to automatically select channel. Stops
at the previous frequency if no channel
is found.
• When the [SEEK ] button is pressed,
it increases the band frequency by
5kHz to automatically select channel.
Stops at the previous frequency if no
channel is found.
5. TUNE/AUDIO Control Button
Turn this button clockwise by one notch
to increase frequency by 0.05MHz from
current frequency.
Turn this button counterclockwise by one
notch to decrease frequency by 0.05MHz
from current frequency.
Type A
Turns to AUDIO CONTROL mode, and
toggles in the order of BASS
➟ ➟ ➟
TREBLE FADER BALANCE
➟
ON ···BASS··· when the button is
pressed each time.
Features of your vehicle
Type B
Turns to AUDIO CONTROL mode, and
toggles in the order of BASS
➟
TREBLE FADER
➟
P.BASS BASS··· when the button is
pressed each time.
6. Preset Button
Push [1]~[6]button less than 0.8 second
to play the channel saved in each button.
Push preset button for 0.8 second or
longer to save current channel to the
respective button with a beep.
7. CD/AUX Selection Button
If there is a CD in the CDP DECK it turns
to CD mode, and if a device is connected
to AUX then it toggles.
➟ ➟
CD AUX CD··· when the button is
pressed each time.(It will not turn to AUX
if the auxiliary device is not connected.)
➟
MIDDLE
➟
AVC
➟ ➟
MIDDLE
➟ ➟ ➟
BALANCE AVC
4 107