Tyre Traction; Tyre Maintenance; Tyre Sidewall Labeling - Hyundai i30 Owner's Manual

G200800AUN-EA

Tyre traction

Tyre traction can be reduced if you
drive on worn tyres, tyres that are
improperly inflated or on slippery
road surfaces. Tyres should be
replaced when tread wear indicators
appear. To reduce the possibility of
losing control, slow down whenever
there is rain, snow or ice on the road.
G200900AUN-EA

Tyre maintenance

In addition to proper inflation, correct
wheel alignment helps to decrease
tyre wear. If you find a tyre is worn
unevenly, have your dealer check the
wheel alignment.
When you have new tyres installed,
make sure they are balanced. This
will increase vehicle ride comfort and
tyre life. Additionally, a tyre should
always be rebalanced if it is removed
from the wheel.
1
2
1
G201000AUN-EA

Tyre sidewall labeling

This information identifies
describes the fundamental charac-
teristics of the tyre and also provides
the tyre identification number (TIN)
for safety standard certification. The
TIN can be used to identify the tyre in
case of a recall.
G201001AUN
1. Manufacturer or brand name
Manufacturer or Brand name is
shown.
G201002AFD-EA
2. Tyre size designation
5,6
A tyre's sidewall is marked with a tyre
size designation. You will need this
7
information when selecting replace-
ment tyres for your car. The following
4
explains what the letters and num-
bers in the tyre size designation
mean.
3
Example tyre size designation:
(These numbers are provided as an
I030B04JM example only; your tyre size designa-
tor could vary depending on your
vehicle.)
205/55R16 91H
and
205 - Tyre width in millimeters.
55 - Aspect ratio. The tyre's section
height as a percentage of its
width.
R - Tyre construction code (Radial).
16 - Rim diameter in inches.
91 - Load Index, a numerical code
associated with the maximum
load the tyre can carry.
H - Speed Rating Symbol. See the
speed rating chart in this section
for additional information.
Maintenance
7 49