Releasing The Hand Brake - Hyundai i30 Owner's Manual

Operation maintenance specifications
Hide thumbs Also See for i30:
Table of Contents

Advertisement

E070202AFD-EA

Releasing the hand brake

To release the hand brake, first apply the
foot brake and pull up the hand brake
lever slightly. Secondly depress the
release button (1) and lower the hand
brake lever (2) while holding the button.
WARNING
• To prevent unintentional move-
ment when stopped and leaving
the vehicle, do not use the
gearshift lever in place of the
hand brake. Set the hand brake
AND make sure the gearshift
lever is securely positioned in 1st
(First) gear or R (Reverse) for
manual transaxle equipped vehi-
cles and in P (Park) for automatic
transaxle equipped vehicles.
OFD057007R
• Never allow anyone who is unfa-
miliar with the vehicle to touch
the hand brake. If the hand brake
is released unintentionally, seri-
ous injury may occur.
• All vehicles should always have
the hand brake fully engaged
when parking to avoid inadver-
tent movement of the car which
can injure occupants or pedestri-
ans.
Driving your vehicle
Check the brake warning light by turning
the ignition switch ON (do not start the
engine). This light will be illuminated
when the hand brake is applied with the
ignition switch in the START or ON posi-
tion.
Before driving, be sure the hand brake is
fully released and the brake warning light
is off.
If the brake warning light remains on
after the hand brake is released while
engine is running, there may be a mal-
function in the brake system. Immediate
attention is necessary.
If at all possible, cease driving the vehi-
cle immediately. If that is not possible,
use extreme caution while operating the
vehicle and only continue to drive the
vehicle until you can reach a safe loca-
tion or repair shop.
W-75
5 19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents