Point Rear Centre Belt; To Release The Seat Belt - Hyundai ix35 Owner's Manual

Installation maintenance specifications
Hide thumbs Also See for ix35:
Table of Contents

Advertisement

1

To release the seat belt:

The seat belt is released by pressing the
release button (1) in the locking buckle.
When it is released, the belt should auto-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.
B210A01NF/H
3 Point rear centre belt (if equipped)
To fasten the rear centre belt
1. Extract the tongue plate from the hole
on the belt assembly cover and slowly
pull the tongue plates out from the
retractor.
CAUTION
Be sure that the cargo is securely
loaded in the rear cargo area. Doing
not so may damage the rear centre
safety belt in sudden stop or certain
collisions.
1KMB3441
2. Insert the tongue plate (A) into the
open end of the buckle (C) until an
audible "click" is heard, indicating the
latch is locked. Make sure the belt is
not twisted.
- Cargo
Safety system of your vehicle
OLM039056L
3 19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents