Honda 08E51-S84-100 Installation Instructions Manual
Hide thumbs
Also See for 08E51-S84-100:
- Installation instructions manual (12 pages) ,
- Installation instructions manual (9 pages) ,
- Operating instructions manual (29 pages)
Table of Contents
Advertisement
Quick Links
INSTRUCTIONS
PARTS LIST
Security System:
P/N 08E51-S84-100
2 Remote controls
Control unit
LED
(Not used)
Push nut
(Not used)
2-Pin connector (for LED)
(Not used)
Disarm switch
Window decal
3-Pin connector
(For disarm switch)
Nut, 12 mm
Washer
Owner's Manual
2 Washer-screws, 4 x 30 mm
© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
Accessory
SECURITY SYSTEM
Attachment Kit:
P/N 08E55-S2A-101
Security system harness
Control unit bracket
Relay, 4-pin
Relay, 6-pin
Fuse label
4 Grommets
4 Self-tapping screws
9 Wire ties
AII 27627 (0408)
Application
2005 S2000
08E55-S2A-1010-91
Publications No.
AII 27627
Issue Date
AUG 2004
1 of 8
Advertisement
Table of Contents
Related Manuals for Honda 08E51-S84-100
Summary of Contents for Honda 08E51-S84-100
- Page 1 Fuse label Nut, 12 mm Washer 4 Grommets Owner’s Manual 4 Self-tapping screws 9 Wire ties 2 Washer-screws, 4 x 30 mm 1 of 8 © 2004 American Honda Motor Co., Inc. - All Rights Reserved. AII 27627 (0408) 08E55-S2A-1010-91...
- Page 2 SECURITY 3429090M FUSE low, the security system may not work even if glass SYSTEM CASE HARNESS is broken. (2A) 2 of 8 AII 27627 (0408) © 2004 American Honda Motor Co., Inc. - All Rights Reserved.
- Page 3 Remove the left kick panel (three clips). KICK CLIP PANEL DRIVER’S SEAT CONNECTOR CLIP SEAT BOLT Torque: 29 N·m (22 lb-ft) CLIP 3429100M 3 of 8 © 2004 American Honda Motor Co., Inc. - All Rights Reserved. AII 27627 (0408)
- Page 4 6 x 12 mm WASHER-BOLT 10. Attach one wire tie with clip to the antenna, then push the clip into the hole in the antenna bracket. 4 of 8 AII 27627 (0408) © 2004 American Honda Motor Co., Inc. - All Rights Reserved.
- Page 5 12 mm nut from the kit. WASHER 12 mm DISARM SWITCH TERMINAL END 5 of 8 © 2004 American Honda Motor Co., Inc. - All Rights Reserved. AII 27627 (0408)
- Page 6 2-pin connector. 18. Secure the security system harness to the corrugated tube of the vehicle harness with one wire tie at the green tape. 6 of 8 AII 27627 (0408) © 2004 American Honda Motor Co., Inc. - All Rights Reserved.
- Page 7 WIRE TIE SYSTEM CONNECTOR 16-PIN CONNECTOR 3429080M SECURITY SYSTEM 3-PIN CONNECTOR 25. Plug the disarm switch 3-pin connector into the security system harness. 7 of 8 © 2004 American Honda Motor Co., Inc. - All Rights Reserved. AII 27627 (0408)
- Page 8 Torque the rear seat bolts of the front seat to 29 N·m (22 lb-ft), and torque the front seat bolts of the front seat to 22 N·m (16 lb-ft). 8 of 8 AII 27627 (0408) © 2004 American Honda Motor Co., Inc. - All Rights Reserved.