Hdmi/dvi matrix switcher capable of switching up to 8 hdmi/dvi video sources/inputs to 8 independent zones/outputs via hdmi/dvi and cat6/stp (10 pages)
Herculs series hdmi/dvi matrix switcher capable of switching up to 4 hdmi/dvi video sources/inputs to 4 independent zones/outputs via hdmi/dvi and cat6/stp (6 pages)
4 inputs to 2 outputs poh/hdbaset/hdmi/vga
multi-view seamless presentation matrix switcher.
includes 1 power over hdbaset/hdmi rx extender. (29 pages)
4x4 4k hdmi seamless matrix with multi-view tiling, 4 rx units. features independent av routing, mirrored hdmi and uhdotp outputs. (33 pages)
Summary of Contents for Key Digital KD-HD4x4
Page 1
HDBT/HDMI via Single CAT5e/6 Matrix Switcher. technology solutions for virtually all applications where Includes KD-CATHD250POHRx Receiver Extenders. high quality video imaging is important. Key Digital ® is at the forefront of the video industry for Home Theater Setup Guide Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers.
If newer firmware is made available, complete updating instructions will be included with it. Check KD-CATHD250POH KD-CATHD250POH KD-CATHD250POH KD-CATHD250POH › the Key Digital website for any firmware updates. Front Panel Buttons and LEDs Output Select Buttons Display 1 Display 2 Display 3 Display 4 210 ft.
HD4x4/6x6/8x8Lite and all other input and output devices and turn them on. the zone to the matrix. 6. Operate the KD-HD4x4/6x6/8x8Lite switcher via front panel buttons, IR Remote, Serial IR or The default signal path for control signals is to route IR control signals from Expansion I/O Port 1 ›...
Connecting Block Settings The KD-HD4x4/6x6/8x8Lite features a library of 12 internal EDID (Extended Display Identification IR/Remote Control Command List Data) files, in addition to allowing any Input source to receive a copy of the EDID information of any...
» Default EDID library settings [01-12] when ‘D’ variable is selected. The KD-HD4x4/6x6/8x8Lite provide access to all functions when used with an RS-232 control This command will either copy the EDID information from a selected Output to a specific »...
Page 7
Front Panel Buttons Enabled/Disabled: Network Setup, xxx = [000-255], zzzz = [0001-9999] ‘SP C FB E/D’ » SPC ETIPA xxx.xxx. Set Host (unit) IP Address to xxx.xxx.xxx.xxx Where ‘E’ will Enable the front panel buttons and ‘D’ will Disable the front panel buttons. »...
First you must download the Device Manager software from the KD-4x4Lite/KD-6x6Lite or › KD-8x8Lite product pages on the Key Digital website. The software can be found under the SPE xx IRR z S yy Route IR from xx to I/O Port yy from z;...
Audio Return Channel Audio Return Channel features rely on CEC to work effectively. CEC is not enabled through the KD-HD4x4/6x6/8x8Lite matrix; therefore a CEC connection must be made elsewhere. This connection can be enabled by connecting two Champion Series HiFi Commercial ProS HDMI ™...
KD-HD6x6Lite, KD-HD8x8Lite: 2U, Full Rack Width (rack ears included) » KD-HD4x4Lite: 1U You MUST use the Power Supply provided with your unit or you VOID the Key Digital » ® Warranty and risk damage to your unit and associated equipment.
® Phone: 914-667-9700 › E-mail: tech@keydigital.com › Repairs and Warranty Service Should your product require warranty service or repair, please obtain a Key Digital ® Return Material Authorization (RMA) number by contacting us at: Phone: 914-667-9700 › E-mail: rma@keydigital.com ›...
Need help?
Do you have a question about the KD-HD4x4 and is the answer not in the manual?
Questions and answers