Installing Ink Cartridges - Epson Stylus Scan 2500 Setup Manual

Hide thumbs Also See for Stylus Scan 2500:
Table of Contents

Advertisement

When background printing is on, you can use your Macintosh while it is preparing
a document for printing. You must turn on background printing to use the EPSON
StatusMonitor utility to manage print jobs.
3.
Close the Chooser.
Notice for using USB Ports
If you connect several units of the same type, each unit is assigned a separate USB port
number, such as USB port 1, USB port 2, and so on. Performing any of the following
functions may cause the USB port numbers for the individual units to change.
Restarting your Macintosh
Turning the Stylus Scan off and on
Detaching and reconnecting the USB cable
Please check the assigned USB port number in the Chooser after performing any of
these functions.
Before turning on your USB hub (if necessary) and your Stylus Scan, turn on the
Macintosh and wait until the desktop appears.
When unplugging the USB cord, wait a few seconds before plugging it back in.
Otherwise, the Macintosh may not recognize your Stylus Scan and you may be unable
to print correctly.

Installing Ink Cartridges

w
Before installing the ink cartridges, note the following.
Warning:
The ink cartridges are self-contained units. Under ordinary use, ink will not
leak from a cartridge. If ink does get on your hands, wash them thoroughly
with soap and water. If ink gets into your eyes, flush them immediately with
water. If discomfort or vision problems remain after a through flushing, see
a doctor immediately.
Note:
Do not open the ink cartridge packages until just before you install them, or the
ink may dry up.
Always use new ink cartriges. Reinstalling partially empty ink cartridges causes
the printer to send inaccurate information to the Status Monitor regarding the
amount of ink remaining.
Use the ink cartridges packed with your printer the first time you install ink
cartridges, otherwise the printer may not charge ink properly.
Follow the steps below to install the ink cartridges.
1.
Make sure the Stylus Scan is turned on.
24
Installing Ink Cartridges

Advertisement

Table of Contents
loading

Table of Contents