Epson Stylus Scan 2500 Setup Manual page 20

20. The following dialog box appears.
In the Copy files from box, type D:\EPSON\ENGLISH (or your preferred language).
Then click OK. If your CD-ROM drive has a drive letter other than D, substitute
the appropriate letter. The system installs the required driver.
21. To install the printer driver and scanner driver, follow the same procedure as step
19 to 20.
Note:
Depending on your computer, you should repeat the step 21 again.
22. During the driver installation, the EPSON Screen Calibration utility starts auto-
matically.
Note:
Be sure to calibrate your screen and Stylus Scan to ensure that the colors of
reproduced images closely match the originals.
23. In the following window, move the slider to the right or left until the two shades
of gray horizontal stripes match.
Note:
The gray stripes will not perfectly blend together; however, try to make the two
tones match as closely as possible.
24. Click OK to register the calibration setting.
25. Follow the on-screen instructions to complete the installation.
20
d
Setting up your Stylus Scan 2500