Printing A Nozzle Check Pattern - Epson Stylus Scan 2500 Setup Manual

3.
Load the stack of paper with the printable side up and the right edge of the paper
resting against the right side of the sheet feeder. Slide the left edge guide against
the edge of the paper.
Note:
Always load paper into the sheet feeder short edge first.
Make sure the paper stack fits under the arrow mark inside the edge guide.

Printing a Nozzle Check Pattern

Follow the on-screen instructions to check the print-head nozzles. If the on-screen
instructions do not appear on your system, follow the instructions below.
E
Hold down the
button ( in the illustration below) to turn on the Stylus Scan, then release both buttons.
The Stylus Scan begins printing a nozzle check page.
28
load/eject button ( in the illustration below) and press the
printable side up
P
Checking the Stylus Scan
power