Related Manuals for Marshall Amplification JMP-1H
Summary of Contents for Marshall Amplification JMP-1H
- Page 1 OWNER’S MANUAL JMP-1H and JMP-1C Limited Edition, 50th Anniversary, all-valve 1-Watt Head and Combo commemorating the 1970s decade of Marshall...
- Page 2 This equipment has been tested and found to comply with the requirements of the EMC Directive Jim Marshall (Environments E1, E2, and E3 EN 55103-1/2) and the Low Voltage Directive in the E.U. EUROPE ONLY – Note: The Peak Inrush current for the JMP-1H and the JMP-1C is 4.4A.
-
Page 3: Front Panel
Your amp is provided with a detachable mains This is the output used to feed a 16Ω extension JMP-1H panel is identical but runs in the opposite This controls the amount of low frequencies (power) lead, which is connected here. The cabinet, a typical example being a Marshall direction. - Page 4 Notes Notes...
- Page 5 Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118 www.marshallamps.com Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Marshall Amplification plc reserve the right to alter specifications without prior notice. BOOK-00105-00 / 11 / 11...