Honeywell ms2420 User Manual page 72

Cable Connector Configurations
Aux Port Configuration Cable*
PN 57-57008x-N-3
Pin
1 No Connect
2 Output from Scanner
3 Input to Scanner
4 No Connect
5 Ground
6-9
No Connect
RS232 LSO/AUX Cable, PN 57-57099x-3
Pin
1 Signal Ground
2 RS232 from Aux / Secondary Scanner
3 RS232 to Aux / Secondary Scanner
4 RTS from Aux / Secondary Scanner
5 CTS to Aux / Secondary Scanner
6-8 No Connect
9 + 5VDC – Transformer / Direct
10 Shield Ground
* This configuration cable was designed to be used with the MS2420 auxiliary connector only.
** All signals are referenced from the MS2420 scanner.
†
All signals are referenced from the auxiliary / secondary scanner.
Specifications are subject to change without notice.
68
Function**
†
Function
9-Pin D-Type Connector
10-Position Modular Plug