With A Tether - Honda CR-V 2007 Navigation Manual

Installing a Child Seat
Installing a Child Seat with a
Tether
A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seat-
back, and the center seating position
has an anchorage point in the ceiling
near the tailgate.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
48
Using an Outer Anchor
ANCHOR
1. On vehicles with the dual deck
cargo shelf, remove it (see page
111 ).
2. After properly securing the child
seat (see page 46 ), remove the
head restraint, then route the
tether strap over the seat-back.
Make sure to store the removed
head restraint in the cargo area
and to reinstall it when the child
seat is removed.
ANCHOR
TETHER STRAP HOOK
3. Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
4. Tighten the strap according to the
seat maker's instructions.
5. Reinstall the dual deck cargo shelf.