Honda CR-V 2007 Navigation Manual page 305

Each time you press and release the
RDM button, the mode changes
from folder random play to random
play (within a disc random play),
then to normal playing.
SCAN (TRACK/FILE SCAN)
The scan function samples all tracks
(files in MP3 or WMA) on the disc in
the order they are recorded on the
disc. To activate scan, press the
SCAN button. In MP3 or WMA
mode, press the SCAN button
repeatedly to select SCAN. You will
see SCAN in the display. You will get
a 10 second sampling of each track/
file on the disc. Press and hold the
SCAN button again to get out of scan
mode and play the last track/file
sampled.
Pressing either side of the SEEK/
SKIP bar also turns off the scan
feature.
Playing Discs (EX and EX-L models without navigation system)
In MP3 or WMA mode
F-SCAN (FOLDER SCAN)
feature, when activated, samples the
first file of each folder on the disc.
To activate folder scan, press the
SCAN button twice. You will see
F-SCAN in the display.
The system plays the first file in the
first folder for about 10 seconds. If
you do nothing, the system will then
play the first files in the remaining
folders for 10 seconds each. After
playing the first file of the last folder,
the system plays normally.
Pressing either side of the SEEK/
SKIP bar, or selecting a different
folder with the TUNE knob also
turns off the scan feature.
Each time you press and release the
SCAN button, the mode changes
from scan to folder scan, disc scan
then to normal playing.
DISC-SCAN This function
This samples each first track of all the
discs in the in-dash disc changer in
the order they are stored. To
activate disc scan, press the SCAN
button repeatedly until you will see
D-SCAN in the display. The system
will then play the first track/file of
the first disc for approximately 10
seconds. After playing the first track
/file of the last disc, the system plays
normally.
157