Honda CR-V 2007 Navigation Manual page 239

BATTERY
TAB
2. Separate the transmitter by prying
its middle seam with your
fingernail.
3. Inside the transmitter, separate
the inner cover from the keypad
by releasing the two tabs on the
cover.
4. Remove the old battery, and insert
a new battery into the back of the
cover with the side facing down.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations
for battery disposal.
5. Install the parts in reverse order.
Remote Transmitter
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
91