With A Tether - Honda CR-V 2008 Manual

Main Menu
Installing a Child Seat
Installing a Child Seat with a
Tether
A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seat-
back, and the center seating position
has an anchorage point in the ceiling
near the tailgate.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
48
Table Of Contents
Using an Outer Anchor
1. On vehicles with the dual deck
cargo shelf, remove it (see page
114 ).
2. After properly securing the child
seat (see page
head restraint, then route the
tether strap over the seat-back.
Make sure to store the removed
head restraint in the cargo area
and to reinstall it when the child
seat is removed.
WWW.PlanDeGraissage.ORG
ANCHOR
3.
4.
46 ), remove the
5.
ANCHOR
TETHER STRAP HOOK
Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
Tighten the strap according to the
seat maker's instructions.
Reinstall the dual deck cargo shelf.