With A Tether - Honda 2005 CR-V Owner's Manual

Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Using an Outer Anchor
COVER
1. After properly securing the child
seat (see page 43 ), remove the
head restraint, then route the
tether strap over the seat-back.
Installing a Child Seat
TETHER STRAP HOOK
2. Remove the cover with a small
flat-tipped screwdriver or
fingernail file, then attach the
tether strap hook to the anchor,
making sure the strap is not
twisted.
3. Tighten the strap according to the
seat maker's instructions.
ANCHOR
CONTINUED
45