Honda CR-V 2007 Navigation Manual page 430

Lights
6. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
7. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
8. Turn on the lights to make sure
the new bulb is working.
9. Align the clips on the taillight
assembly with the holes in the
body, then push the taillight
assembly into place. Tighten the
two mounting screws securely and
reinstall the covers.
282
Replacing a High-mount Brake
Light Bulb
1. Open the tailgate.
Unlatch the top of the cover by
pulling back on it with hands.
2. Place a cloth on the side edge of
the cover. Remove the cover by
carefully prying on the edge with a
small flat-tip screwdriver and
pulling the cover off.
3. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.