Using Speed Dialling; Sending A Document With Speed Dialling; Using Coded Speed Dialling - Canon FAX-L280 User Manual

Using Coded Speed Dialling

Once you have registered fax/telephone numbers for one-touch speed
dialling (
( p. 6-13), you can begin to send documents or make telephone calls
with speed dialling.

Sending a Document With Speed Dialling

Follow this procedure to send a document using one-touch speed dialling,
coded speed dialling, or group dialling:
1
Load the document, face down in
the ADF (
2
Enter the one-touch speed dialling
button or coded speed dialling code
assigned to the fax number or group
you want to send to.
3
Press Start/Copy to begin scanning
for sending, or wait a few seconds
for the FAX to begin scanning
automatically.
6-16
Speed Dialling
p. 6-3), coded speed dialling (
p. 4-3).
To adjust the resolution and
contrast, see pp. 7-2, 7-3.
You may be unable to send if the
memory used (shown in the LCD)
is close to 100%. To free up space
in the FAX's memory: print, send, or
delete any documents you no longer
need to be stored in memory (
9-5).
One-touch speed dialling button:
Press the one-touch speed
dialling button you want.
Coded speed dialling code:
Press Coded Dial, then use the
numeric buttons to enter the
two-digit code you want.
If you make a mistake, press
Stop and repeat this step.
NO TEL # appears if no
.
fax/telephone number or group
is assigned to the speed dialling
button or code you pressed.
If you do not want the FAX to
begin scanning automatically after a
few seconds, disable the TIME OUT
setting ( p. 14-6).
p. 6-8), or group dialling
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
p.
(Standby to scan)
Chapter 6