2
Fixing assembly area:
.
Top edge of the jammed paper in the
fixing assembly:
Push the jammed paper back
pull it carefully towards you to remove
it
.
.
The fixing assembly (shaded) becomes
extremely hot when the unit is in use.
Be very careful not to touch it so as to
avoid injury.
Top edge of the jammed paper has passed
through the fixing assembly:
Pass the jammed paper under the roller.
Use both hands to carefully pull out the
jammed paper.
13-6
Troubleshooting
Do this carefully to prevent
tearing the jammed paper. If
you do tear it, be sure to
remove any torn pieces from
the unit since these will cause
paper to jam again.
, then
.
DO NOT TOUCH THE FIXING ASSEMBLY
Chapter 13