Making A Quick Single Copy - Canon FAX-L280 User Manual

7
If you want to make multiple
copies, use the numeric buttons to
enter the number of copies.
You can make up to 99 copies.
The FAX copies at 400 × 300 dpi for single copies, and at 200 × 300 dpi
for multiple copies. For best quality output, make one copy at a time.
8
Press Start/Copy to begin copying.
To cancel copying, press Stop.
You may then need to open the
operation panel to remove the
document from the ADF
(
You will be unable to make multiple copies if MEMORY FULL appears in
the LCD. Print, send, or delete any documents stored in memory to free
up space in the FAX's memory (
are copying multiple pages with many graphics, separate the pages into
smaller stacks or make the desired number of copies one at a time as
needed.

Making a Quick Single Copy

Follow this procedure if you want to make a quick single copy of a
document without adjusting the resolution, contrast, or size:
1
Load the document, face down in
the ADF (
2
Press Start/Copy twice to begin
copying.
To cancel copying, press Stop.
You may then need to open
the operation panel to remove
the document from the ADF
(
Chapter 10
p. 13-2).
p. 4-3).
p. 13-2).
Ex:
COPY
COPY
p. 9-5), then start again. Also, if you
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
COPY
COPY
80% 05
(Standby to scan)
100% 01
10-3
Copying