Removal
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
WARNING
Relieve pressure; page 6.
1.
Do Fan Belt, Removal; page 10.
2.
Fig. 4. Loosen motor knob (55). Swing motor retainer
bracket (105) out.
3.
Remove engine (119) and rocker plate (99) from sprayer.
4.
Remove four screws (23), washers (7) and nuts (24) and
remove rocker plate (99), dampeners (153) and washers
(154) from engine (119).
ti5407a
F
. 4
IG
310778N
Engine
Installation
1.
2.
3.
4.
55
105
Install rocker plate (99), dampeners (153) and washers
(154) on engine (119) with four screws (23), washers (7)
and nuts (24); torque to 125 in-lb (14.1 N·m).
Install engine and rocker plate (99) on sprayer.
Swing motor retainer bracket (105) in. Tighten motor knob
(55).
Do Fan Belt, Installation; page 10.
Engine
24
7
119
154
153
99
154
23
11