ATEN Altusen KN1108v User Manual page 68

KVM Over the NET™ User Manual
Click to select the mouse pointer type.
Note: This icon changes depending on which mouse pointer type is
Click to toggle Automatic or Manual mouse sync.
See Mouse DynaSync Mode, page 76 for a complete explanation of
this feature.
Click to display a dropdown list of User macros in order to access
and run macros more conveniently than using the Macros dialog box
(see the Macros icon in the table above, and the Macros section on
page 55).
Click to toggle sound from the remote server to be heard on the client
computer's speakers on or off. The "prohibited" symbol (a red circle
with a diagonal bar) displays on the icon when the speaker is toggled
Off.
Under an accessed port, click to skip to the first port accessible to the
user on the entire installation without having to recall the Port Access
page.
Under an accessed port, click to skip to the first port accessible to the
user that is previous to the current one without having to recall the
Port Access page.
Under an accessed port, click to skip to the first port accessible to the
user that is after the current one without having to recall the Port
Access page.
Under an accessed port, click to skip to the last port accessible to the
user on the entire installation without having to recall the Port Access
page.
Under an accessed port, click to begin Auto Scan Mode. The
KN1108v / KN1116v automatically switches among the ports that
were selected for Auto Scanning with the Filter function (see Filter,
page 87). This allows you to monitor their activity without having to
switch among them manually.
Under an accessed port, click to invoke Panel Array Mode (see Panel
Array Mode, page 197).
Under an accessed port, clicking this icon cycles you through the
compensation mode choices used by the Adapter cable that
connects the device to the switch. Make a choice (Short, Medium,
Long), depending on the length of Cat 5e cable used for the
connection. The length of the line in the icon changes to indicate
which choice is selected.
Under an accessed port, click to recall the GUI.
53
selected (see Mouse Pointer Type, page 75).
When the selection is Automatic, a green
When the selection is Manual, a red X appears on the icon.
√
appears on the icon.