Table of Contents
Advertisement
3. After filling in the form (all fields are required), click Create.
A self-signed certificate based on the information you just provided is now
stored on the KN1108v / KN1116v switch.
4. Click Get CSR, and save the certificate file (csr.cer) to a convenient
location on your computer
This is the file that you give to the third party CA to apply for their signed
SSL certificate.
5. After the CA sends you the certificate, save it to a convenient location on
your computer. Click Browse to locate the file; then click Upload to store
it on the KN1108v / KN1116v switch.
Note: When you upload the file, the KN1108v / KN1116v switch checks
the file to make sure the specified information still matches. If it
does, the file is accepted; if not, it is rejected.
If you want to remove the certificate (to replace it with a new one because of a
domain name change, for example), simply click Remove CSR.
Chapter 8. Device Management
168
Advertisement
Table of Contents
