Toyota Sienna 2006 Operating Manual page 524

"MODE" button
This button is used to select the item.
Every time you push the "MODE" button,
the display toggles.
For more details, see "—Outside tempera-
ture and cruise information display" on
page 332.
CAUTION
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.
328
06 SIENNA_U (L/O 0603)
—Garage door opener
Buttons
Indicator light
The garage door opener (
Universal Transceiver) is manufactured
R
under license from HomeLink
be programmed to operate
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
(a) Programming the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
R
HomeLink , install a new battery in the
hand- held transmitter prior to program-
ming.
The battery side of the hand- held trans-
mitter must be pointed away from the
R
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
R
in "Programming an entrance gate/Pro-
gramming all devices in the Canadian
and can
market".
garage
1. Decide which of 3 HomeLink
you want to program. Push and hold
down one of the buttons until the indi-
cator corresponding to the selected
channel begins to flash.
2006 SIENNA from March '06 Prod. (OM45443U)
R
R
buttons