Toyota Sienna 2006 Operating Manual page 123

CAUTION
Avoid reclining the seatback
more than needed. The seat belts pro-
vide maximum protection in a frontal
or rear collision when the driver and
the front passenger are sitting up
straight and well back in the seats. If
you are reclined, the lap belt may
slide past your hips and apply re-
straint forces directly to the abdomen
or your neck may contact the shoul-
der belt. In the event of a frontal
collision, the more the seat is re-
clined, the greater the risk of death
or personal injury.
4. SEAT LUMBAR SUPPORT
ADJUSTING KNOB
To change the amount of lumbar sup-
port, turn the knob either way.
06 SIENNA_U (L/O 0603)
—Adjusting driver's seat
(power seat)
any
1. SEAT POSITION, SEAT
ANGLE AND SEAT
ADJUSTING SWITCH
Move the control switch in the desired
direction.
Releasing the switch will stop the seat at
that position.
Do not place anything under the front
seats, as this might interfere with the seat
movement.
2. SEATBACK ANGLE
SWITCH
Move the control switch in the desired
direction.
Releasing the switch will stop the seat-
back at that position.
2006 SIENNA from March '06 Prod. (OM45443U)
CUSHION
HEIGHT
ADJUSTING
59