Parking Brake; Cruise Control - Toyota Sienna 2006 Operating Manual

Parking brake

Type A
Type B
06 SIENNA_U (L/O 0603)
When parking, firmly apply the parking
brake to avoid inadvertent creeping.
To set: Fully depress the parking brake
pedal. For better holding power, first de-
press the brake pedal and hold it while
setting the parking brake.
To release: Depress the parking brake
pedal once again.
To remind you that the parking brake is
set, the parking brake reminder light in
the instrument panel remains on until you
release the parking brake.
CAUTION
Before driving, be sure the parking
brake is fully released and the park-
ing brake reminder light is off.

Cruise control

The cruise control is designed to main-
tain a set cruising speed without requir-
ing the driver to operate the accelera-
tor. Cruising speed can be set to any
speed above 40 km/h (25 mph).
Within the limits of the engine's capabili-
ties, cruising speed can be maintained up
or down grades. However, changes in ve-
hicle speed may occur on steeper grades.
CAUTION
"
To help maintain maximum control
of your vehicle, do not use the
cruise control when
heavy or varying traffic, or on slip-
pery (rainy, icy or snow- covered) or
winding roads.
"
Avoid vehicle speed increases when
driving downhill. If the
speed is too fast in relation to the
cruise control set speed, cancel the
cruise control then downshift the
transmission to use engine braking
to slow down.
2006 SIENNA from March '06 Prod. (OM45443U)
driving in
vehicle
213