Toyota Sienna 2006 Operating Manual page 223

Canada only
Type B
06 SIENNA_U (L/O 0603)
2. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages near the button on the
seatback.
3. Type A—Latch the hooks of lower
straps onto the anchorages
tighten the lower straps.
Type B—Latch the buckles onto the
anchorages.
For owners in Canada—The symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap (for third seats)" on page 153
in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
CAUTION
"
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
and
the seat belt is not caught.
"
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
"
After securing the child restraint
system, never recline the seat.
"
Do not put a child restraint system
on the third seat if it interferes with
the lock mechanism of the second
seats. Otherwise, the child or front
(or second) seat occupant(s) may
be killed or seriously injured in
case of sudden braking or a colli-
sion.
2006 SIENNA from March '06 Prod. (OM45443U)
159