Toyota Sienna 2006 Operating Manual page 43

2. Remove the discharged transmitter bat-
tery.
NOTICE
Do not bend the terminals.
06 SIENNA_U (L/O 0603)
3. Put in a new transmitter battery with
positive (+) side up.
Close the transmitter case securely.
NOTICE
z Make sure the positive side and
negative side of the transmitter bat-
tery are faced correctly.
z Do not replace the battery with wet
hands. Water may cause unexpected
rust.
z Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.
z Be careful not to bend the electrode
when inserting the transmitter bat-
tery and that dust or oils do not
adhere to the transmitter case.
z Close the transmitter case securely.
After replacing battery, check that the
transmitter operates properly. If the trans-
mitter still does not operate properly, con-
tact your Toyota dealer.
2006 SIENNA from March '06 Prod. (OM45443U)
21