Troubleshooting - DeLonghi EC850 Instructions For Use Manual

Problem
The device will not switch on
Espresso coffee does not flow out
Espresso coffee drips from the edges of
holes
device
Loud pump noise
The coffee cream is clear (it flows quickly
from the spout)
attached to the boiler outlet
After the coffee has been prepared, the
pod or coffee powder remains attached to
the boiler outlet
Possible causes
The power supply cable is not inserted
correctly
No water in the tank
The espresso boiler outlet is blocked
or is dirty
The espresso boiler gasket has lost
elasticity or it is dirty
blocked
The water tank is empty
The tank is inserted incorrectly and the
valve on the bottom is not open
The ground coffee has not been
sufficiently pressed
Not enough ground coffee
Incorrect type of ground coffee

Troubleshooting

Solution
Check that the power supply cable
connector is fully inserted in the
appropriate socket on the back of the
correctly connected to the power outlet
Fill the water tank
Clean as indicated in the "Cleaning"
paragraph
After-Sales Centre
Clean the holes in the spouts.
preparation desired.
Fill the tank
Press the tank lightly to open the valve
on the bottom
Increase pressing of the ground coffee
Increase the amount of ground coffee
espresso coffee machines
Change the quality of the ground coffee
remove it.
en