Graco 235-463 Instructions-Parts List Manual page 13

FILTERS
3000 psi (210 bar) Maximum Working Pressure.
Adequate filtering is important for a good surface finish
and to minimize tip clogging. These filters provide
secondary filtering. Various screen meshes are avail-
able.
Mounts in hose
213–068 Includes filter body, spring and one
100 mesh screen.
213–069 Includes filter spring and one
60 mesh screen.
Use with above filter body.
210–742 Includes filter spring and one
100 mesh screen.
Use with above filter body.
210–729 Includes assembly 213–068 plus a
3 ft (0.9 m) whip hose for more
flexible gun movement.
Mounts between hose and gun
210–500 Includes swivel, adapter and one
100 mesh screen
Replacement screens for above filters
210–731 Three 60 mesh (250 micron) screens
210–732 Three 100 mesh (149 micron) screens
210–733 Three 200 mesh (74 micron) screens
SWIVELS and WHIP HOSES
Swivels and whip hoses provide more flexible gun
movement for easier handling and less fatigue.
Working pressures are listed in the descriptions.
207–946 Swivel, 1/2 npsm x 3/8 npt(f)
5000 psi (350 bar) Max. Working Pressure
204–940 Swivel, 1/4 npt x 1/4 npsm
3000 psi (210 bar) Max. Working Pressure
214–701 Whip hose, nylon, coupled 1/4 npsm(f)
x 3/8 npt(m), spring guards both ends.
3000 psi (210 bar) Max. Working Pressure
Accessories
TOOLS
NYLON BRUSHES
Use to thoroughly clean the gun's fluid passages.
101–891
101–892
WRENCH 171–147
Fits all hexes on the gun.
TIP GUARDS
These tip guards fit all Graco airless spray guns.
Choose the one that's right for your application. One of
these tip guards is included with every Graco airless
gun.
237–859
220–251
222–674
0.375" (9 mm) dia.
0.625" (16 mm) dia.
Performance Series Reverse–A–Clean
DripLess Guard.
Order SwitchTip separately.
See your distributor for available sizes.
Standard DripLess Tip Guard.
Order flat tip separately.
See your distributor for available sizes.
Heavy Duty RAC DripLess
Order SwitchTip separately.
See your distributor for available sizes.
Tip Guard.