Graco 218-026 Instructions-Parts List Manual page 31

FILTER (AIR OR PAINT) 202–271
52 bar (750 psi)MAXIMUM WORKING PRESSURE
With 250 micron (60 mesh) element,
3/8 npt(f) inlet, 3/8 npt(m) outlet
SPRAY SYSTEM ACCESSORIES
218–118 ELECTROSTATIC SYSTEM
Includes items:
218–026 Manual Electrostatic Air Spray Gun
218–103 Grounded Air Supply Hose (See
page 30 for specifications)
216–077 Fluid Hose (See page 30 for
specifications)
106–148 Air Filter
218–123 ELECTROSTATIC SYSTEM
Includes items:
218–026 Manual Electrostatic Air Spray Gun
218–101 Grounded Air Supply Hose (See
and page 30 for specifications)
216–076 Fluid Hose (See page 30 for
specifications)
106–148 Air Filter
218–124 ELECTROSTATIC SYSTEM
Includes items:
218–026 Manual Electrostatic Air Spray Gun
218–102 Grounded Air Supply Hose (See
and page 30 for specifications)
216–077 Fluid Hose (See page 30 for
specifications)
106–148 Air Filter
PRO4000H GUN ELECTROSTATIC HIGH
CONDUCTIVITY KIT 222–029
For converting the PRO4000 Gun to spray conductive
(metallic) paints. Since there are so many variations in
paint formulations, Graco recommends your specific ma-
terial be tested for useability with this gun.
NOTE: The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
ACCESSORIES
ISOLATION STAND 728–650
Required for isolating the fluid supply from the ground
when spraying conductive water–base fluid.
CONDUCTIVE (WATER BASE) HOSE KIT 221–008
For converting gun to handle conductive (water base) flu-
ids. See instruction manual 307–639.
NOTE: The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
WATER BASE PACKING KIT 220–014
For converting packings to handle water base fluids.
NOTE: The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
WATER BASE CONTROL BOX 218–619
7 bar (100 psi) MAXIMUM WORKING PRESSURE
110–115 Volt output; 50–60 Hz
Pneumatically operated control box used in a water base
electrostatic system to automatically bleed the electro-
static charge from the water base fluid supply when the
gun is released or the safety fence is open.
Must also order the following:
221–008
728–650
CONDUCTIVE (SOLVENT BASE) HOSE KIT
218–568
For converting gun to handle conductive (solvent base)
fluids. See instruction manual 307–640.
NOTE: The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
MISCELLANEOUS ACCESSORIES
PAINT RESISTANCE METER 722–886
Used with 722–860 Paint Probe to measure resistance of
paint. Not for use in Hazardous areas.
PAINT PROBE 722–860
Used with 722–886 Paint Resistance Meter to
measure resistance of paint. Not for use in
Hazardous areas.
MEGOHMMETER 218–979
500 Volt output; 0.01–2000 megohms
GUN COVER 180–209
Order Part No. 218–374 for package of 10.
Water Base Conductive Hose Kit
Isolation Stand