Server Chassis Features; System Power; Hard Drives; Pci Expansion Slots - Supero SUPERSERVER 1027R-72RFTP User Manual

Hide thumbs Also See for SUPERSERVER 1027R-72RFTP:
Table of Contents

Advertisement

1-3

Server Chassis Features

The 1027R-72RFTP is built upon the SC119TQ-R700WB chassis. Details on the
chassis and on servicing procedures can be found in Chapter 6.The following is a
general outline of the main features of the chassis.

System Power

The SC119TQ-R700WB features two redundant 700W power supplies. The system
does not need to be shut down when replacing or removing a single power supply
module.

Hard Drives

The chassis was designed to support eight hot-swap SAS or SATA hard drives.

PCI Expansion Slots

Two riser cards are included. The RSC-R1UW-E8R is located on the right side of the
chassis and supports one low-profi le (max. length = 6.6") PCI-E x8 card. The RSC-
R1UW-2E16 is located on the left side of the chassis and supports two full-height,
half-length PCI-E x16 add-on cards. See section 5-6 of this manual for details.

Front Control Panel

The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), system information and
UID (Unit Identifi cation). A main power button and a UID button is also included.

Cooling System

The system has an innovative cooling design that features six sets of 4-cm counter-
rotating fans located in the middle section of the chassis. Fan speed may be varied
by IPMI to respond to fl uctuations in system temperature. The power supply module
also includes a cooling fan.
1-3
Chapter 1: Introduction

Advertisement

Table of Contents
loading

Table of Contents