Supero SUPERSERVER 1027R-72RFTP User Manual page 62

S S
UPER ERVER 1027R-72RFTP User's Manual
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
defi nitions.
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. Attach
it to a hardware reset switch on the
computer case. Refer to the table on
the right for pin defi nitions.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be confi gured to function as
a suspend button (with a setting in
the BIOS - See Chapter 5). To turn
off the power when the system is in
suspend mode, press the button for 4
seconds or longer. Refer to the table
on the right for pin defi nitions.
Pin Defi nitions (JF1)
Pin#
5
6
Pin Defi nitions (JF1)
Pin#
3
4
Pin Defi nitions (JF1)
Pin#
1
2
5-16
PWR Fail LED
Defi nition
3.3V
PWR Supply Fail
Reset Button
Defi nition
Reset
Ground
Power Button
Defi nition
Signal
Ground