Security - Supero SUPERSERVER 6015TC-LFT User Manual

S S
UPER ERVER 6015TC-LFT User's Manual
7-5

Security

Choose Security from the Phoenix BIOS Setup Utility main menu with the arrow
keys. You should see the following display. Security setting options are displayed
by highlighting the setting using the arrow keys and pressing <Enter>. All Security
BIOS settings are described in this section.
Supervisor Password Is:
This feature indicates if a supervisor password has been entered into the system.
Clear means such a password has not been used, and Set means a supervisor
password has been entered.
User Password Is:
This feature indicates if a user password has been entered into the system. Clear
means such a password has not been used, and Set means a user password has
been entered.
Set Supervisor Password
When the item Set "Supervisor Password" is highlighted, hit the <Enter> key.
When prompted,enter the Supervisor's password in the dialogue box to set or to
change supervisor's password which will allow the user to access the BIOS with
the privilege as a supervisor.
Set User Password
When the item "Set User Password" is highlighted, hit the <Enter> key. When
prompted, enter the user's password in the dialogue box to set or to change the
user's password, which allows the user to access the system at bootup.
7-22