Supero SUPERSERVER 6015TC-LFT User Manual page 52

S S
UPER ERVER 6015TC-LFT User's Manual
BMC IPMI Enable (X7DCT-3IBXF)
JPB allows the user to enable or disable
BMC (Baseboard Management Control)
Chip and the onboard IPMI connections.
This jumper is to be used together with the
IPMI settings in the BIOS. If this jumper is
set to Enabled, please also enable IPMI
settings in the BIOS and vice versa. The
default position is on pins 1 and 2 to En-
able BMC. See the table on the right for
jumper settings.
Note: For more information on IPMI con-
fi guration, please refer to the Embedded
IPMI User's Guide posted on our web-
site: http://www.supermicro.com/support/
manuals/.
SAS Enable/Disable
JPS1 allows the user to enable or disable
the SAS controller. The default position is
on pins 1 and 2 to enable SAS. See the
table on the right for jumper settings.
SAS RAID Mode Select
JPS2 allows the user to select RAID
Confi guration Mode. The default position
is open to use Integrated RAID (Hardware
RAID). See the table on the right for
jumper settings.
Note: For more information on the LSI
SAS MegaRAID configuration, please
refer to the LSI MegaRAID User's Guide
posted on our website: http://www.super-
micro.com/support/manuals/.
BMC IPMI Enable/Disable
Jumper Settings (JPB)
Settings Defi nition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
SAS Enable/Disable Jumper
Settings (JPS1)
Both Jumpers
Pins 1-2
Pins 2-3
SAS RAID Mode Select
Jumper Settings (JPS2)
Both Jumpers
Open IT RAID (Default)
Closed Software RAID
5-18
Defi nition
Enabled (Default)
Disabled
Defi nition