Table of Contents
Advertisement
S
S
UPER
ERVER 6015TC-LFT User's Manual
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
Fan Headers
The X7DCT-LF has three 4-pin fan
headers. See the table on the right for
pin defi nitions.
Note: The onboard fan speed is con-
trolled by the CPU die temperature.
LAN1/2 (Ethernet Ports)
Two gigabit Ethernet ports (designated
LAN1 and LAN2) are located beside
the VGA port on the I/O backplane.
These ports accept RJ45 type cables.
Universal Serial Bus (USB)
There are two Universal Serial Bus
ports located on the I/O panel,
two USB headers located on the
serverboard and a third USB port
(USB4) located onboard near the
SGPIO header. The headers, labeled
USB2 and USB3, can be used to
provide front side USB access (cables
not included). See the tables on the
right for pin defi nitions.
NMI Button
Pin Defi nitions (JF1)
Pin#
19
20
Fan Header
Pin Defi nitions
Pin#
1
2
3
4
USB Ports Pin
Defi nitions (USB0/1/4)
Pin#
1
2
3
4
5
USB Headers
Pin Defi nitions (USB2/3)
USB2
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
Key
5-14
Defi nition
Control
Ground
(FAN1-3)
Defi nition
Ground (Black)
+12V (Red)
Tachometer
PWM Control
Defi nition
+5V
PO-
PO+
Ground
N/A
USB3
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
No connection
Advertisement
Table of Contents
